Registruotis     Pamiršau slaptažodį     Naudotojo vardas:   Slaptažodis:  

Minkštinimo filtrai WATEX CMS-10 (202)

WATEX

CMS10

Kaina be PVM: 537.31 EUR

Vasarnamis

Privatus namas

Viešbutis

Gamykla

Katilinė

Geležis: Kontaktuojant su oru, vanduo tampa rudas ir palieka sunkiai valomas nuosėdas ant sanitarinių įrenginių – tualeto puodų, praustuvų, dušo kabinų ir vonių. Vanduo nėra malonaus skonio ir suteikia nepatogumų, kadangi turi metalinį prieskonį ir geležies kvapą, taip pat naudojant šį vandenį sparčiau susidėvi buitiniai prietaisai ir apauga dumbliais vamzdžiai.

Manganas: Pradžioje vanduo yra skaidrus, tačiau jam kontaktuojant su oru pasirodo tamsus atspalvis ir juodos nuosėdos ant sanitarinių įrenginių. Turi metalinį prieskonį. Dažnai mangane yra geležies. Norma 0,05 mg/l. 

Nuovirai: Kietumą suteikiančios druskos Ca ir Mg kuria nuovirų nuosėdas ant sanitarinių įrenginių. Dėl nuovirų užsikemša vamzdžiai, dušo sieteliai, atvamzdžiai ir šildymo elementai. Dėl to žymiai mažėja įvairios įrangos tinkamos eksploatacijos laikas bei mažėja energijos suvartojimo efektyvumas.

Amonis: Amonio jonai geriamajame vandenyje gali neigiamai paveikti vandens dezinfekcijos efektyvumą, pablogindami jį, taip pat gali sugadinti mangano filtrą (nes vandens tiekimo sistemose yra daugiau nitratų) ir suprastindami vandens skonį ir kvapą. Nustatyta ribinė amonio kvapo koncentracija yra 1,5 mg/l (esant šarminiam pH), o pasikeitęs skonis stebimas, jei amonio koncentracija pasiekia 35 mg/l, savo ruožtu ypač jautrūs asmenys gali pajusti amonio jonų buvimą net jeigu koncentracija yra mažesnė.

Количество потребителей 1 

 Количество потребителей 2

Количество потребителей 3

Количество потребителей 4

Regeneracija naudojant druską 

Srauto kontrolė 

Automatinis veikimas 

Yra sandėlyje 

Устанавливаем оборудование 

Доставка в вами указаном месте и времени 

į krepšelį
Užduoti klausimą

Jautājuma forma
Minkštinimo filtrai WATEX CMS-10

Aprašymas

Description
  • Effective solution for water softening, removal of iron, manganese and amonium
  • Regeneration with brine solution from salt tablets (NaCl)
  • Reliable and efficient operation for at least 10 years
  • Apply for private houses, cottages, guesthouses, small apartment houses connected to central water supply systems
  • Automatic purification and regeneration by volume control
  • Simple installation and maintenance
  • Low operating costs
  • High quality materials, components
  • Filter does not remove smell. WATEX CMB or CTO or AERO should be installed in addition
WATER QUALITY PROBLEM
Hardness salts, Ca and Mg form scale deposits on heat exchangers, nozzles, fittings, pipes, sanitary facilities. Fine technical equipment rapidly out of order or increasing power consumption.
 
SOLUTION
The solution of these problems for households and production needs is softening by WATEX CMS series ion exchange resin filters (reduces limescale) that are regenerated with NaCl. Water softening equipment also effectively reduce iron, manganese and ammonium.
 
FILTER PERFORMANCE
For recovery of filtering material (ion resins) reagent (NaCl or salt tablets) is used. Wastewaters produced in regeneration processes of equipment in WATEX CMS  can be directly discharged to biological wastewater treatment plant. WATEX CMS consists of a filter column, control unit and salt tank. The filter column is filled with ion exchange resin (cationic), which reduces hardness and iron concentration in water. The control unit performs automatic regeneration. Salt tank is filled with a reagent (NaCl, salt tablets) for resin regeneration. Capacity of filter material is calculated according to amount of resins and raw water quality.                
 
FILTER CONTROL
WATEX CMS is equipped with a Clack WSCI1 control unit, with a built-in flow meter that performs filter material regeneration according to water consumption. Flowmeter saves water and salt used for filter regeneration. The unit can be fitted with a bypass pipeline that allows to perform maintenance works with ease. Control unit saves all information in case of power failure. Equipment has many parameters that can be adjusted according to needs, such as washing time, frequency, reagent consumption, and so on. It is possible to change the water hardness.                                    
 
EQUIPMENT MAINTENANCE                                
Although the equipment uses salt tablets for regeneration it is safe to use filtered water for drinking and other human needs. It is necessary to provide electricity connection power (one socket), sewerage drainage and incoming / outgoing water supply with minimum pressure of 2.5 bar.              
 
 
RECOMMENDATIONS
  • Before selection of equipment, it is recommended to test raw water chemical composition.
  • Before the water filter, it is preferable to install mechanical filter to ensure long-term equipment service life.

Additional equipment options:
  • Condensate isolation for tank
  • By-pass valve – For easier assembly
  • Repair and maintenance kit – Spanner wrench, injectors (2 pcs.)
 
 
Technical parameters of equipment
Unit
Model
 
CMS 8
CMS 9
CMS 10
 
Flow rate Qmax
m3/h
0.6
1.0
1.6
 
The amount of water for regeneration (min)
liters
100
130
156
 
The amount of water for regeneration (max)
m3/h
0.6
0.8
1.0
 
Tank size (diameter) 
inches
8
9
10
 
m
0.20
0.23
0.25
 
Tank volume
liters
25
32
64
 
The amount of filtering material
liters
15
25
40
 
Dimensions
 
 
 
 
 
Length
m
0.53
0.56
0.59
 
Width
m
0.28
0.28
0.28
 
Height
m
1.14
1.47
1.62
 
Connection. in /ext/kan.
inches
1”
1”
1”
 
Clack control unit
 
CI 1”
CI 1”
CI 1”
Filtration
 
Hardness, iron
Tank material
 
FRP (fiberglass)
Filtering material
 
Ion exchange resins RESINEX KW-8, silica sand 1x3mm, 3x5 mm
Operating pressure
bar
2-6
Electric Connection
 
220V, 50Hz, 1 phase
Electricity consumption
W
3 W
 

Back to Top